An interceptor gives grease and food solids time to separate from wastewater before it leaves the tank. Buildup around the baffles or outlet tee can restrict flow and make those parts harder to check. Slow drains or standing water in the sink can also point to a blocked line. Knowing where the tank is and describing the symptoms can help a provider understand what needs attention. Call to describe the problem to someone who serves your area.
Call (562) 647-7230 to reach a provider →
How interceptors differ from indoor traps
An indoor grease trap is typically a smaller unit near kitchen fixtures. An interceptor is usually a larger tank installed below ground outside the building, where it receives wastewater from kitchen drains.
Both hold wastewater so grease and solids can separate, but access and cleaning methods differ. An outdoor tank may have lids over separate compartments and fittings. Its capacity and the location of those lids are useful details to have when discussing service.
What thorough cleaning includes
- Pumping out accumulated grease, wastewater and settled solids from the tank.
- Removing residue from tank walls and accessible internal surfaces.
- Cleaning around inlet and outlet tees so their openings can be checked.
- Clearing buildup from baffles that direct wastewater through the tank.
- Checking and cleaning the sample box, if the system has one.
- Using water jetting where needed to loosen stubborn deposits on accessible surfaces.
Ask the provider which steps are included and whether the service record will note the tank's condition.
Confined space considerations
An interceptor is a confined space where harmful gases and low oxygen can make entry dangerous. An open lid does not make the air inside safe to breathe.
Providers usually pump and clean from above using hoses and tools, without entering the tank. Keep staff away from open access points and make room around the lids for the work. If entry is ever needed, ask how the provider handles confined-space safety.
Inspecting tees, baffles and lids
The inlet and outlet tees guide wastewater through the interceptor. Once grease is cleared, a provider can look for missing sections, cracks or openings blocked by debris.
Baffles help direct flow and separate material inside the tank. Damage or heavy buildup can interfere with that flow and make the interceptor harder to maintain.
Lids should fit securely and be accessible for service. Ask for any visible damage to be documented, along with recommendations for repair.
How buildup affects inspections
A thick layer of grease or settled solids can hide the condition of baffles and tees. It can also make it harder to see how wastewater moves through the tank.
Your city or sewer district sets local maintenance requirements, so keep service records where you can find them. Records showing the work performed and any damage noted can help you prepare for an inspection. Ask the provider to explain anything on the record that is unclear.
What affects the price of interceptor cleaning
Tank capacity, the amount of accumulated material and the condition of the fittings can affect the work involved. Access matters too: lids under parked vehicles or equipment may take preparation before cleaning can begin. Jetting, sample box cleaning and repairs may be handled separately from pumping. Describe the tank and ask the provider what the quoted service includes, including any paperwork and disposal of removed material.
Grease interceptor cleaning questions
Is interceptor cleaning different from interceptor pumping?
Pumping removes the contents of the tank. Cleaning also addresses residue on accessible walls and fittings, which may include jetting where needed. Ask the provider which steps are included in the service.
How do I find my interceptor?
Look for access lids outside the building, often near the kitchen or its drain lines. Building plans and past maintenance paperwork may show the location. Do not open or enter the tank yourself.
What if parts inside are broken?
Ask the provider to document the damaged part and its condition. Find out whether repair is included or needs separate arrangements, and keep the documentation with your maintenance records.
Can cleaning happen while the kitchen is open?
It may be possible, depending on tank access and whether kitchen drains need to stay unused during the work. Discuss your operating hours and drainage needs with the provider before scheduling.